• Home
  • Blog
  • Whirlpool Oven Igniter Not Working? Get It Fired Up Again

Whirlpool Oven Igniter Not Working? Get It Fired Up Again

Ugh, there’s nothing worse than trying to bake your favorite dish, only to realize your Whirlpool oven igniter isn’t working. Don’t worry, though – we’ve all been there, and we’re here to help you get that oven fired up again!

Signs Your Whirlpool Oven Igniter is Not Working

Before we dive into the nitty-gritty details, let’s first identify the telltale signs that your Whirlpool oven igniter is on the fritz. If you notice any of the following, it’s likely time for a replacement:

Yep, those are all pretty clear indicators that something’s not quite right with your igniter. But hey, don’t sweat it – we’re about to walk you through everything you need to know to get that bad boy up and running again.

whirlpool oven igniter not working

Common Causes of a Faulty Whirlpool Oven Igniter

Before we get into the nitty-gritty of replacing your igniter, it’s worth understanding what might have caused the issue in the first place. Here are some of the most common culprits:

Knowing the potential cause can help you troubleshoot more effectively, but in many cases, the solution is simply to replace the igniter altogether. And hey, don’t feel too bad – even the best igniters have a limited lifespan.

Step-by-Step Guide: How to Replace a Whirlpool Oven Igniter

Alright, let’s get down to business! Here’s a step-by-step guide on how to replace your Whirlpool oven igniter:

  1. Gather your supplies: You’ll need a new igniter (compatible with your oven model), a screwdriver, pliers, and a multimeter (if you want to test the old igniter).
  2. Unplug your oven and let it cool down completely. Safety first, folks!
  3. Remove the oven door and access panel. Consult your owner’s manual for specific instructions on how to do this for your model.
  4. Locate the old igniter. It’s usually near the burner assembly or at the back of the oven.
  5. Disconnect the old igniter. This may involve unscrewing it, unplugging it, or both.
  6. Install the new igniter. Follow the same steps in reverse, making sure it’s securely connected and positioned correctly.
  7. Reassemble your oven. Replace the access panel and oven door, being careful not to overtighten any screws.
  8. Plug in your oven and test the new igniter. If all went well, your oven should now heat up like a charm!

Boom – there you have it! A brand-new igniter, ready to fire up your oven for all your baking and roasting needs. Just remember to take your time, follow the instructions carefully, and don’t be afraid to refer to your owner’s manual or seek professional help if you get stuck.

Whirlpool Oven Igniter Replacement Cost and Where to Buy

Alright, so you’ve decided to take the plunge and replace your Whirlpool oven igniter. But how much is this little repair going to set you back?

Well, the good news is that oven igniters are relatively inexpensive, especially when compared to the cost of a brand-new oven. On average, you can expect to pay anywhere from $20 to $100 for a new Whirlpool igniter, depending on your specific oven model.

As for where to buy, you’ve got a few options:

No matter where you decide to purchase your new igniter, be sure to factor in shipping costs (if applicable) and keep your oven model information handy to ensure you get the right part.

Even with a shiny new igniter installed, you may still run into some hiccups. But don’t worry – we’ve got your back with these troubleshooting tips:

With a little patience and persistence, you’ll have your Whirlpool oven igniter working like a charm in no time. And hey, if all else fails, at least you’ll have a funny story to tell at your next dinner party!

Don't Miss Out, Check Newest Post